20170201 Sun

Cloud keeps moving around today, seeing 5/10, transparency 4/10.

Don't really have time to fine tune to focus or the T-max.


0706 (UT), with reducer:

0710 (UT), with 2x barlows:-

0711 (UT), with 2x barlows, that interesting filaments attracted my eyes:-

The last image really shows how poor is the T-max, very uneven bandwidth across this little frame.

Polemaster and Sharpcap 2.9+

I went last night without any luck, the sky was too bad.

Tonight the sky seems a bit better, so I went again.  A nearby light polluted sky, with the polar region partially blocked.

Since I've tested with Polemaster software, and tonight I play with Sharpcap 2.9+.  If the automatic plate solving works, it's simpler for the Polemaster software requires manual pattern matching.

To my surprise, it works out very nicely!

Here's the screen shots of how it works... Plate solving success...

And then rotate along RA, success again... 

After polar alignment with Sharpcap, I proceed with the software of Polemaster and it works!   Confirmed the alignment.

And then I removed the polarscope caps, saw Polaris in the expected position!  I hope I could do some wide field imaging soon!

20170125 Sun

Glad that we still have some sunshine today, seeing 5/10, transparency 4/10.

0652 (UT) with reducer:

0655 (UT) with 2x barlows:

Keep on going...

20170124 Sun

We have some brief clear moments today, seeing 5/10, transparency 5/10.

0711 (UT) , with reducer:

0717 (UT), with 2x barlows:

 

BTW, I'm switching my job and my new job will start from mid-Feb... so at the time being, I've more time to observe.

20170123 Sun

Let's keep thing as monochromatic as it should be.

Full disc at 0700 (UT), taken with a reducer.

 Close up of AR2628, with a 2x barlows, 0705 (UT):-

I have to push the exposure and gain really high to show this hedgerow, 0709 (UT), again with a 2x barlows.

Cloud moves around today, seeing 5/10, transparency 5/10.

20170122 Sun

Seeing quite good at 6/10, transparency 6/10.

0706 (UT), with reducer, rather sharp and finer detail could be seen.

0714 (UT), with 3x barlows, Newton's ring persist as well as some dust artifacts, I did not drift around the image enough while capturing.

Switched to use AutoStakkert!

Wavelet goes back to Registax, and final touch with PS.

PoleMaster

I always said, there are three important basic techniques for astrophotography namely: collimation, focusing and polar alignment.  And in Cantonese we said: 對焦，對 pole, 對光軸...

For focusing, I have a motorized focuser.  For collimation, I bought the original Bob's knob for collimation.  And now for polar alignment, I have just bought the QHY PoleMaster!

To use it in the field, I use my Teclast tablet via OTG cable.  And it connects without any problem, I've tried it in day time but the exposure control is very limited so that even at its lowest setting, the screen white out.  Can't wait to test it tonight in a nearby location, I hope I could find a place where the Polaris is visible.

--

 I really got chance to try it out in the field on the same night.

I only got time to go to a nearby playground but then I don't know if Polaris is visible or not there... After more than half an hour, I guess I made it.  Note the bright thick line across was from a distant (not too far away) tower crane!  The Polaris is barely visible, and then light pollution was very severe so that pushing the gain/exposure further will only white out the whole screen.

Finding the center of rotation of the Sky Adventurer is not easy by pressing the button since it's just too slow.  And instead, I disengage the clutch and move it manually but this is not recommended as stated in the user manual.

Finally, I pulled out my DSLR and tested with my 50mm lens.  I stopped the aperture and set ISO low so that I could do a 3-minute exposure under such a sky, star remains pinpoint, good news.

20170121 Sun

20170121 0649 (UT), Ranger with reducer:-

0656 (UT), 3x barlows, 90% resized, AR2625 and AR2626:-

20170120 Sun

Excellent transparency (Hong Kong standard, of course) 9/10 with quite nice day time seeing at 7/10! However, excessive dust on my CCD renders higher image scale useless... I guess a 3x barlows should be ideal. First up is the full disc shot, with the reducer at 0614 (UT):-

And then two high power shots without the reducer, but with a 5x powermate, taken at 0628 and 0633 (UT) respectively.

20161227 Sun

Cold front coming, seeing exceptionally poor from 0-2/10 at best... cannot properly focus.

0604 (UT) with a reducer, some nice filaments around but cannot go any higher power.

20161219 Sun

We finally have a small active region (AR2619) today!

Here is a 5x shot with a reducer (forgot to remove), note the dust on the CMOS, 0701 (UT):-

And now the full disc, 0655 (UT):-

20161216 Sun

Very poor seeing due to the cold front, no detail even with reducer:

0702 (UT), just a record.

20161213 Sun

Another day, my elder daughter was still sick at home, and I stayed with her.

1359 (GMT+8).

Sun 20161212

Another imaging session, but the sun was not very active so I only took the following full disc shot with my Ranger + reducer lens.

Gain was set to zero this time, 1338 (GMT+8):-

20161128 Sun

I don't know if this is the first time for me to use the ASI120mm, I had one before but sold shortly, this one was newly acquired.

First one taken with my Ranger with a reducer lens, 1245 (GMT+8):-

Second one with a 3x barlows, 2 frames mosaic... uneven illumination, long time no practice, taken at 1253 and 1255 (GMT+8).:-

After taking the images, I found that I didn't set the gain to zero and it was set at 50% which is very high.  No wonder why the result image is rather noisy.

I found no more Newton's ring even at 3x?

Motoring the DEC axis of Sky Adventurer

The first working version is finished...

A new budget notebook

My Asus Eee has been repaired several times, I've replaced its keyboard, hard drive, battery and even CPU/chipset fan.  The transformer is dying so that I could use it either to charge up the battery or to operate the computer but not both, otherwise, the computer will reboot itself randomly.  Worst yet, it is still running Windows XP and would be obsolete enough soon, for example, no more dropbox in the near future.

So I took the plunge to buy a new notebook, but I was on a budget.  I want something light and small, despite I could use my Teclast tablet when I want absolute portability.  Finally, I got a Acer Aspire ES 11 which features a bigger display, and it's lighter in weight and has better battery life.  USB 3.0 port is available as well, but of course, it won't be much faster.  This is a fact of life, you choose only two: cost, performance, portability.

I have installed everything there so that it would be my next work horse.  ASI 120mm and 120mc drivers were installed,  that megapixel monochrome camera too!  No more dropped frame with the all the cameras.  So nice! 

20160715 Sun (and also 20160716, added on 20170916)

Got a half day off today with the kids, found that the sun could be seen from another room with a less desirable angle, anyway, why not?

Pull out everything and went to another room, the view was a bit blocked but still do-able.  The JMI focuser controller is oh-no, low battery and cannot move at all.  Removing four screws and replace the battery is time consuming, the sun was going away.  My Teclast was low battery, too, just 7% left... what's bad is that, I couldn't charge it and use the USB port for my cheapy bw cam at the same time... So, I took the plunge and do it all without all those adversities.

Click for full size, taken at 0724 (UT)... T-max does not tuned well, aligned with only a single point, i.e. AR 2565.  I had just ordered an ASI 120mm (again) in the hope to get better image, let's see.  Why I was selling that was due to the Newton's ring, and my current bw cam got Newton's ring too...

--

20170916 Sun

I found that there is an unprocessed clip in my home NAS, and just did the processing and add it back.

Surprisingly similar to the one above, maybe the file name was incorrect?  But it was generated by Sharpcap...  anyway, just as a record.

Motoring the DEC axis of the Sky Adventurer mount

Found suitable gears and motor, installed them right away.

Step one: try to find the suitable location for the motor for correct gear meshing, fix it with a tape:

Then, use some instant glue to fix it in place, add hot melt glue to further reinforce the position.

Finally, solder cables and also standard jet for connection to the controller box.  Add hot melt glue to insulation the bare end of the cable.

Done. 

A short clip before the soldering work to show the gear meshing:

Enhancing the Nexstar mount

Last time I pulled the whole setup to a nearby playground, I managed to put the OTA, the tripod and every accessories inside a medium sized backpack.  And the Nexstar mount was placed inside another bag.  It's very portable indeed.

The backlash has to be adjusted further for high power imaging. 

For the power, I used 8 AA rechargeable batteries, and it gives ~2400mmAh at around 9.6V, after playing for around two hours, I guess only 50% power was left.

I've tried to fit 3 pieces of 18650 inside the battery compartment last time, and it's even smaller than 8 AA!  So I took the plunge to remove the original battery box and replace it with a 18650 battery box.

With higher quality 18650, say 3400mmAh (measured by myself), now I've 3400mmAh at around 11.1V so it should last even longer.  With my current charger, I could recharge them at once, instead of two times (i.e. four at a time), and it's much more efficient, too.  The cost of the 18650 is similar to AA rechargeable, by similar, I mean the cost of one piece of 18650 is similar to that of the cost of one piece of AA rechargeable!  So, the overall cost is less than a half.

And it's lighter too!

 
The modification is simple and even reversible, just some very simple soldering work.