More items added but price reduced. (18 Nov 2011 update AGAIN) (21 Nov 2011 three more items and the same price)
Or name your price, reasonable offer will be entertained, just don't want to waste all these stuff.
First up is a 70mm doublet (f=500mm) mounted and with 77mm thread, suitable for macro imaging which brings the closest focusing distance down to less than 500mm. Ask for $200 HKD.
Astrotech 1.25" dielectric diagonal in great condition, flawless mirror and with the original box, ask for $350 HKD.
Generic small Chinese ballhead, suitable for digital camera, ask for $50 HKD. (RESERVED for CL Chan)
Shoestring FCUSB, virtually new never used in the field, ask for $500 HKD. Control and power your JMI focuser via your USB port. Ask for $500 HKD.
Celestron Nexstar mount parts, including both motors with encoders, also the gears.
Ask for $400 HKD, the motors alone should cost more than that. And I got the following information from a CN buddy:
"These were used on the original Nexstar 5 and 8. The 5 and 8i used Lo-Cog Pittmans with different encoders. These things are available for about $275 each new.
The same early motor was used on the classic Meade LX200 16", although the gear reduction was 19.5:1. I was able to find a recent series 8000 Lo-Cog on eBay with the correct gear ratio and swap the gear heads to get the 19.5:1 ratio.
The Meade used a different encoder count too, so the HEDS encoder and the code wheel have to be swapped to use it on the LX200."
Motors were SOLD, gears were still available at $50 HKD.
Sealed Lead Action battery, reliable power solution in the field. Comes with a Panasonic 12V 7.5Ah SLA battery, a charger which will take 12V or 6V SLA, and also a generic notebook transformer which offers 15-24V by using the 12V SLA. Ask for $100 HKD for all three!
You will one day want this tool, it's for creating threads and threaded holes yourself. Virtually new and ask for $50 HKD only (RESERVED for Simon).
JMI 2" -> 1.25" compression ring adapter:-
DIY 43mm male thread afocal imaging adapter:-
Never used JJC EC-2 Eyepiece Extender for Canon EOS DSLR:-
Another custom machined 2" to 1.25" adapter, it's pretty heavy and could be good for balancing light weight 1.25" eyepiece and heavier 2" eyepiece. With two locking screws for added security.
Originally for my Gitzo G1415 when I lost one of the spikes on the legs, so I still have two remain. I've sold my G1415 and now they're sitting idle... very hard to find in Hong Kong and even the distributor refused to order them for me. Ask for $200 HKD.
A small 7-14x monocular, good quality for this size.
No comments:
Post a Comment