20140124 Sun as the first test of my enhanced Mark-X

I'm active again, the Ranger focuser was regreased, and the Mark-X was enhanced.  The work was mostly done except only the polarscope illuminator was not yet fixed in place.

See the pencil mark to see where should be trimmed for fitting.

Fitted in and mounting screws hole drilled, fixed in place.

Two more holes on mounting the DEC slow motion control block in place, smaller holes were drilled first for the possibility of fine tuning by enlarging for better fit.

The old mounting bar was used to guide the new mounting holes.

Done and it looks as in my mind before all the actual drilling work.

The first light in action!

The ballhead side was not used, and it could be used for wide field imaging or simply as a balance.

--

This is the first light of the mount, 1209 (GMT+8):-

And dimmer group of the top center (a bit right) is very interesting and it should be AR 1957, worth continue monitoring if situation allows.

Ranger at prime focus.

Enlarging the hole of U-adapter

Before the process, I only have access of a simple hand drill borrowed from someone.

The difference is not too small, 3-4mm I measure:-

It was difficult and required a lot of patience.

 

This is close to done, but I would leave it alone first after like 2 hours of hard work:

When this is done, I've to enlarge the mount holes to fix it on the Mark-X mounting holes.  And then I will need to drill two holes on the mounting plate to fix the DEC slow motion control worm block.

U-adapter arrived

This is very light weight and strong.  It's originally for GP, and I've to enlarge the polar scope bore by 5mm.  I planned to do it slowly by sanding away those metal, a hard work but it should work out better than any other way.

The mounting holes have to be modified as well, and also to fix that DEC slow motion control in place.  Another side could be used to fix a 3/8" ball head directly.

Once this is done, I can start doing some wide field imaging.

I'm still waiting for good bargain on second hand NGF-S or NGF-CM.  The delivery of Solarmax is another unknown since the local dealer said Meade is having problem.

20140106 Sun

First light after focuser re-greasing.

Prime focus at 1342 (GMT+8):-

Close up with 5x Powermate at 1459 (GMT+8), the DEC worm block was re-greased after the above shot and before the following shot.

AR1944.

Re-greasing the DEC worm block

Did it after the prime focus shot, since when going for high power, I found some problem.

Adjusted the tension screws and the retaining screws, feel much better now.

Regreasing the Ranger focuser again

The focuser was getting bad over the years, I've re-greased once it after 8 years of ownership.  Now, it's the 16th year!  Despite the original focuser was retired itself for one or two years when a NGF-CM was used instead for motorizing focusing, it still serves me long enough.

Last time I just bought a Boron grease from a model shop and the grease was not sticky enough.  Focusing was smooth but you could easily go beyond the point since it's not sticky enough.  Recently, a local buddy gave me some sticky high quality lithium grease so I take the plunge to do it again.

This time, I was doing a complete regreasing.  Last time when I was regreasing my LXD55, I gained enough experience so I could do it more completely.  Last time, new grease was added but the old one was not removed.  Frankly, there's an emotional reason behind that since the Ranger gave a Tele Vue smell which is probably from the grease so I dare not to clean them up completely.  But now the smell was mostly gone, so I did actually remove all the old grease.  And during the removal process, I could notice some residue Tele Vue smell and it's now the last time!

The old Tele Vue grease mixed with Boron grease after around 8 years.

Some of the grease was dried up and this is probably why the focusing action was no longer smooth.

After cleaning.

And after re-greasing:

It works better than the first re-grease, nearly as great as the moment when it arrives.

20131231

We went to Pak Tam Chung (aka PTC for local buddies) for a short observation, taxi from Sai Kung was around $60 and it took just around 10 minutes to arrive.

Armed with my Ranger on a small tripod, and also my Canon 10x30 IS, we had some good time under the starry skies.  The sky was not very dark by any standard because we have some not-far-away street lamps and a toilet nearby with naked lights.  However, it's enough for several hours of target hunting.

Several local buddies were taking images so no green laser points to guide around, but it's not too hard to use finger and repeated descriptions.

This time, we have also bought a camping cookset.  It allows hot drinks and cup noodles which are so nice in cool weather. 

It's just wonderful to start a new year under a starry sky!

--

Equipment modified project:

I've just ordered a U-adapter originally for Vixen GP, and I shall adapt it to my Mark-X and the hardest part is to enlarge the 35mm polar scope hole to 40mm to fit my Mark-X.  Patience is the king.  Drilling holes for my slow motion control and to mount to the Mark-X should be relatively easy.

20131205 Moon and Venus

They got really close, a 55mm lens in APS-C format:

Up close with my Ranger at prime focus, 1853 (GMT+8):
 

Overexposed to bring out the darker side, 1855 (GMT+8), 1/7.5s maximum gain:

Vertical artifacts could be seen easily.

I have shared the eyepiece view with my kids, they were amazed.

Getting back into the game!

I guess I will take the plunge to get back into the game, this is the plan in my mind.

First of all, I will do H-alpha solar imaging again by getting a filter set for my Ranger.  I will also need to get back myself with a JMI motorized focuser both for better focusing and more in-travel to allow the use of a reducer lens for full disc image.  Adapter has to be made to fit the Solarmax with my Ranger.

Secondly, I will need to optimize my Mark-X to get two scope/camera at the same time, or a counter weight on the other side.  A Vixen GP photo guider like adapter should be made, one side for the slow motion adapter and another side for a ball head.

Finally, I will be looking for a 100mm class ED refractor for visual observation.  This is the last step and I shall wait for good deal.  It will allow me to do better white light sun, some wide field night time observation, and visual planet or lunar observation or imaging.

That's above what I could do to sustain and remain myself in the hobby.

20131203 Venus

With 5x Powermate, seeing worsen compared with yesterday.

Taken at 1811 (GMT+8).

20131202 Sun and Venus

Plenty of sunshine these days, and the sun is pretty active too.  Seeing becomes a little bit more stable and I would rate it as 3/10, transparency on the high side at 6-7/10.

Prime focus, taken at 1257 (GMT+8):-

With 5x Powermate, 1302 (GMT+8) and 1304 (GMT+8):-

Finally, I pulled out my 4mm to have a look.

And later on the same day, I take a look with Venus together with my family members and then took the following:-

Again with a 5x Powermate, 1817 (GMT+8).

The Mark-X tracks really well for over half an hour at 120x, still dead center.

20131130 Sun

Call me a fool, I tried to overexpose the sun to scan around to see if I could detect ISON... of course I couldn't, but there is no harm and no cost.

The side effect was a sun image at prime focus:

Taken at 1224 (GMT+8).

Alternative power for my GOTO Mark-X

I've made a USB power interface with a broken extensible mouse cable previously:

http://osastrolog.blogspot.hk/2012/03/carton-cxd-1-field-power-solution.html

And it works so far.  Under strong sun light, however, the solar battery will deliver from the solar panel directly and the current is not stable for that case.  Also, I found the solar battery might actually drain itself when the ambient light level is insufficient for charging!  Therefore, I want an alternative power supply.

For that matter, I've bought a couple of 18650 Lithium battery.  When two of them are connected in series, we have 7.4V which is enough to drive the system.  At 2400mm, this is more than enough for a whole night of tracking with just two.  And I've bought four of them, so it's more than enough!

The USB solution was kept in place.

And the dual 18650 batteries were sneaked at the back of the hand controller.

After testing, one set of batteries (i.e. two of them) could last for over 20 hours.  I've four on hand and thus it is sufficient for any purpose.

20131118 Sun

Tele Vue Ranger, Baader 3.8 with Generic Green filter, tracked with GOTO Mark-X.

At prime focus, 1600 (GMT+8):-

With 5x, 1613 (GMT+8):-

With 5x, 1616 (GMT+8):-

My Lumenera Lu070M is dusty.  I looked at the sun briefly with the 4mm at 120x, not bad.

20131114 Moon

Tele Vue Ranger with 2x or 5x, Lumenera Lu070M at low gain.  Transparency 7/10, seeing 2-3/10, tracked with GOTO Mark-X.

Two frames stitched using autostitch, 2344 (GMT+8), with 2x barlows:

One more taken with 5x at 2348 (GMT+8), picked ~700 frames out of 3000, pushing gain to medium to allow faster speed to freeze seeing, most detail were still washed out:

I've pulled out my 4mm to watch for a while, the adjustable eye-cup is effective.  This is not an easy to use eyepiece, however, but not a problem to experienced observer.

20131028 Sun (and an accidental finding)

Plenty of sunshine today but we have cloud scattered around, visual observation is okay but imaging is an nightmare, I've to wait until clear moments.  Seeing, however, does not change and remain bad.  I would rate transparency at 6/10 and seeing at 3/10.

Imaging without barlows is easy, since moving cloud would be averaged out, taken at 1550 (GMT+8):-

With 5x powermate, AR1884 and 1885, taken at 1602 (GMT+8):-

With 5x powermate, AR1873 and 1875, taken at 1604 (GMT+8):-

All taken with my only telescope, Ranger with Baader 3.8 and a generic green filter, Lumenera LU070M, around 1/100s exposure with very low gain.

And I found the DIY DEC body manual slow control knob of my Mark-X could be used with a broken microwave oven switch!

 And I guess it will spend more of its life with the microwave oven than under the starry sky!

Garage sales continues

Package deal: $399 HKD takes them all! 


Individual items price reduced, all reasonable offer will be entertained, just don't want to waste all these stuff.

Canon EOS to 1.25" nosepiece adapter, bought from ScopeStuff, ask for $200 HKD, connect your Canon DSLR with a telescope with 1.25" focuser.

SkyAtlas 2000.0 Deluxe Version, ask for $200:-

And the inside, a pen is placed along side to see the size, it's really a good visual reference!

Another custom machined 2" to 1.25" adapter, it's pretty heavy and could be good for balancing light weight 1.25" eyepiece and heavier 2" eyepiece. With two locking screws for added security.  Ask for $50 HKD.

Originally for my Gitzo G1415 when I lost one of the spikes on the legs, so I still have two remain. I've sold my G1415 and now they're sitting idle... very hard to find in Hong Kong and even the distributor refused to order them for me. Ask for $100 HKD.

Free stuff when purchase all:

One of those screw type cases was sent as free gift already, so two eyepiece boxes and a simple tripod is still available as bundled free gift:

20131020 Venus

Thank you indeed, since you're still reading this.

I've given up most of my hobby by selling most of my stuff to support my life as a full time pastor.  I will not give it up, however.

After a whole day of services, I woke up after an involuntary afternoon nap and to my surprise, I saw a bright object outside.  I verified it to be Venus with my Zopo mobile phone.

I pulled out my Ranger, set it up on my Mark-X, with rough polar alignment, tracking at 2400mm (480mm with 5x Powermate) is simple.  Insert the Lumenera Lu070M, centering and focusing is hard but not impossible.  Manual focusing with the aged helical is a hard exercise.  Centering the object with eyepiece and replace with the Lumenera is not easy either.

Anyway, I got it...  fast shutter plus high gain to freeze seeing:

Taken at 1838 (GMT+8), I enjoy capturing this featureless venus with its beautiful phase.  I've viewed through the 4mm eyepiece for sure.

BTW, I've sold my Canon 100-400mm a few days ago. I will miss it forever, just like my H-alpha filter set.